新闻中心

News

澳门新葡京3648葡京www.56333.com

相干静态

当前位置:  > 新闻中心  > 相干静态

UL 817对插头印字做出的新要求

工夫:2015-03-14

TO: Subscribers to UL’s Listing and Recognition Service for Cord Sets and Power Supply Cords (ELBZ and ELBZ7)
致:电线组件及插头线 (ELBZ和ELBZ7)列名及承认效劳的客户

SUBJECT:  Marking Requirement Change for Listed Power Supply Cords
主题:列名电源插头线的标记调换关照

The purpose of this bulletin is to inform manufacturers of power supply cords of a revised Follow-Up Service marking requirement.
此通告的目标是为了关照插头线工场后续跟踪效劳中标识的更改。

The marking requirement described in this bulletin will go into effect on July 1,2015.
标识的修正要求将于2015年7月1日见效。

The instructions in this bulletin supersede the instructions in the Subject 817 FUII dated August 10, 2012. Until formal revisions are made to the FUIIs, please file this bulletin with your Follow-Up Service Procedure.
此公告中的指令将庖代2012年8月10日公布的跟踪磨练指引中的指令。正在跟踪磨练指引作出正式修正前,请将此公告取跟踪磨练顺序一同存档。

As part of UL’s goal to continue to improve the integrity of the UL Mark, as part of our enhanced Mark Integrity Program, and to differentiate UL Certified power supply cords from other certifiers, UL will be requiring that the “UL” in a circle be molded on the face (or other surface) of the attachment plug. Having the “UL” in a circle molded on the plug will help to identify that the complete PSC is UL certified.
作为UL连续改进标记完整性目的的一部分,作为加强UL标记完整性的一部分,和为了使UL认证电源插头线与其他认证可以或许被辨别开,UL要求将带圆圈的UL列名标记模压到UL插头上。具有UL列名标识可以或许资助辨认制品的电源插头线具有UL认证。
  Users of a PSC where the flexible cord bears the UL Mark could easily assume that the complete PSC is UL Certified, when, in reality, only the flexible cord is certified. It is important that users of PSC can clearly identify that the PSC is UL Certified, especially after the packaging, including the holographic label, has been removed.
实际中,当软线被认证且标注UL标识时,装配该软线的制品电源插头线很容易被以为是与得了UL认证。那么这个时候,关于电源插头线的使用者来讲,很重要的一点是可以或许清晰的辨别电源插头线是不是与得了UL认证,特别是正在包装——包孕全息UL标签被移除后。
Please note the use of the “UL” in a circle molded on the attachment plug is in addition to, not in lieu of, the use of the Holographic labels as both are needed as evidence of UL coverage.
请注重,产物打上带圆圈的UL标记要求是对产物加揭全息UL标签的增添要求,而非替换要求。此二要求配合作为产物有UL认证的证实。

As this marking change would require tooling modifications, and in some cases your customer’s approval to add the “UL” in a circle to the molds, an 18 months effective date was determined acceptable.

由于标识调换需求变动模具,和您的客户需求认可增添UL标识,以是18个月的见效过渡期是可接受的。